Contact Us

Case Studies and Testimonials

Alpha Solway products are supplied through our large network of distributors and can be found protecting people at work across a broad range of industrial sectors.

SATISFACTION, GUARANTEED

We strive to ensure our products offer the best protection in their class and are always pleased to hear how they help our customers.

Here’s what some of them have to say;

 

"THE BEST WE HAVE COME ACROSS"

"We have found that the Alpha Solway 3030V and Alpha S have proved to provide the best disposable respirator results. We have a very low failure rate and on average the test results are between 400 to a 1000 pass level.

Considering the mask only has a pass Ievel requirement of l00, our 14 years of experience shows this to be the best we have come across".

Lee Hine and Paul Chamberlain
WEFIT RPE LTD

"NO OTHERS ON THE MARKET HAVE MATCHED THIS"

"We are particularly impressed with the Alpha Solway FFP3 8030v disposable mask, the quality is much better than many others we have tried, as such both our customers & our own staff prefer them to other makes & models.

Most importantly the orange Alphamesh 8030v has a 100% success rate with fit testing - no others on the market have matched this within the 5 years we have been fit testing!"

Mike Pearson
SATS-SITE ASSESSMENT & TRAINING SERVICES LTD

"THE BEST FIT TEST PERFORMANCE"

"Having performed countless fit tests with most of the brands and types of tight fitting RPE available on the market, I have concluded that the Alpha Solway 3030V provides the best fit test performance of any disposable respirator I have tested."

Tim Hayward
PANORAMIC SAFETY SERVICES

"MUCH EASIER TO FIT FOR FIRST TIME USERS"

"I am very impressed with the ALPHA S-3V mask. The institute employs staff from all over the world and finding a mask to cover the wide variety of face shapes has been problematic in the past. I have since tested at least 60 staff with the ALPHA S-3V mask and all have achieved a 100% pass rate. The ALPHA S-3V is also much easier to fit for first time users as there is no metal nose-piece to mould."

Neil Brew
Site RPS and H&S Advisor, Babraham Institute